How to service evaporative cooler?
24.12.2019
Below is the list of our Standard Servicing Procedure:
CLEAN COMPONENTS
- Wash filter pads thoroughly - remove all dust and other debris. Check for any damage.
- Clean the internal water tank thoroughly
CHECK OPERATION AND SETTINGS
- Check the fan blade and fan motor operation
- Test correct operation of the solenoid inlet valve
- Check float valve operation and water level setting
- Test operation of the water pump
- Test the drain valve is functioning correctly
- Check there are no water leaks either internally or external to the cooler
- Inspect dropper box and roof flashings for any rust or damage
TEST SYSTEM PERFOMANCE
- Test the water distribution across filter pads for even and complete saturation
- Check for adequate airflow from the outlets
- Provide detailed report on the completion
- Advise customer on the best practises to achieve maximum cooling efficiency